Press Drive
Many different versions of the punching system exist. Hydraulic, hydramechanical, and air driven. The two mechanical rams use a flywheel driven by an electric motor to develop tonnage. In a hydramechanical system a small hydraulic pump delivers oil to a solenoid which when activated causes the clutch to engage generating a punch cycle.
Newer machines primarily use hydraulic cylinders with smart controllers to punch.
Clutch Plate Hyd C/B 30 ton
includes 6-M10 x 25mm SHCS, and Retainer Washer
(Replaces Strippit® Part Number 802994-220)
Hyd C/B Brake Spring set of 6.
(Replaces Strippit® Part Number 802994-270)
(Replaces Strippit® Part Number 207992)
Request quote at Parts@CNCMachineryLLC.com
Brake Disk lined Hyd C/B Good Used Sold individually
Replaces Strippit® Part Number 802503-000
We sell them individually for your convenience. Keep in mind the outer disk in the PAK is normally ground to adjust the thickness of the PAK. Do not replace this without grinding to makeup original thickness. Typically just replace worn disks within the PAK or pads that have been damaged.
Seal Outer Cover Hyd C/B
(Replaces Strippit® Part Number 802499-000)
Request quote at Parts@CNCMachineryLLC.com
Gauge 0-1500 PSI Liquid Filled
Replaces Strippit® Part Number 1000705-400
Replaces Strippit ® 123898-120
Guide Striker M
(Replaces Strippit® Part Number 120312-000)
Request quote at Parts@CNCMachineryLLC.com
Striker Housing M RECONDITIONED
(Replaces Strippit® Part Number 119717-000)
Request quote at Parts@CNCMachineryLLC.com
Brake Drive Ring and Hsg reconditioned
(Replaces Strippit® Part Number 802994-440)
Splined Hub Hyd C/B Internal
(Replaces Strippit® Part Number 802994-350)
Request quote at Parts@CNCMachineryLLC.com