Press Drive
Many different versions of the punching system exist. Hydraulic, hydramechanical, and air driven. The two mechanical rams use a flywheel driven by an electric motor to develop tonnage. In a hydramechanical system a small hydraulic pump delivers oil to a solenoid which when activated causes the clutch to engage generating a punch cycle.
Newer machines primarily use hydraulic cylinders with smart controllers to punch.
Clutch Plate Hyd C/B 30 ton
includes 6-M10 x 25mm SHCS, and Retainer Washer
(Replaces Strippit® Part Number 802994-220)
Brake Disk lined Hyd C/B Good Used Sold individually
Replaces Strippit® Part Number 802503-000
We sell them individually for your convenience. Keep in mind the outer disk in the PAK is normally ground to adjust the thickness of the PAK. Do not replace this without grinding to makeup original thickness. Typically just replace worn disks within the PAK or pads that have been damaged.
Seal Outer Cover Hyd C/B
(Replaces Strippit® Part Number 802499-000)
Request quote at Parts@CNCMachineryLLC.com
Accumulator L.P. H&L
replaces Strippit® 1002166-002
Request quote at Parts@CNCMachineryLLC.com
Heat Exchanger complete with fan
This is a replacement for the exchanger on the Hydraulic clutch brake power pack
NON STOCK ITEM LEADTIME A.R.O. 2 weeks......call to expedite
AOC-190-86167
Request quote at Parts@CNCMachineryLLC.com
Motor Fan Fasco Hyd C/B Power Unit
Strippit® used 3 different units so make sure you check your motor if it is a Fasco this is the proper part
Replaces Fasco® part A67233
Request quote at Parts@CNCMachineryLLC.com
Brake Drive Ring and Hsg reconditioned
(Replaces Strippit® Part Number 802994-440)