Press Drive
Many different versions of the punching system exist. Hydraulic, hydramechanical, and air driven. The two mechanical rams use a flywheel driven by an electric motor to develop tonnage. In a hydramechanical system a small hydraulic pump delivers oil to a solenoid which when activated causes the clutch to engage generating a punch cycle.
Newer machines primarily use hydraulic cylinders with smart controllers to punch.
Pump Group HYD C/B Main 1000PSI
contains both pumps, coupled together
rebuilt must return core
replaces Strippit® 802994-050
Hyd C/B Brake Spring set of 6.
(Replaces Strippit® Part Number 802994-270)
(Replaces Strippit® Part Number 207992)
Accumulator Hyd. C/B
(Replaces Strippit® Part 802504-000)
(replaces Strippit® Part 802494-000)
Brake Disk lined Hyd C/B Good Used Sold individually
Replaces Strippit® Part Number 802503-000
We sell them individually for your convenience. Keep in mind the outer disk in the PAK is normally ground to adjust the thickness of the PAK. Do not replace this without grinding to makeup original thickness. Typically just replace worn disks within the PAK or pads that have been damaged.
Seal Outer Cover Hyd C/B
(Replaces Strippit® Part Number 802499-000)
Request quote at Parts@CNCMachineryLLC.com
Clutch Plate 20 ton
includes 6-M10 x 25mm SHCS, and Retainer Washer
(Replaces Strippit® Part Number 803414-300)
Gauge 0-1500 PSI Liquid Filled
Replaces Strippit® Part Number 1000705-400
Replaces Strippit ® 123898-120
Heat Exchanger complete with fan
This is a replacement for the exchanger on the Hydraulic clutch brake power pack
NON STOCK ITEM LEADTIME A.R.O. 2 weeks......call to expedite
AOC-190-86167
Request quote at Parts@CNCMachineryLLC.com
Motor Fan Fasco Hyd C/B Power Unit
Strippit® used 3 different units so make sure you check your motor if it is a Fasco this is the proper part
Replaces Fasco® part A67233
Request quote at Parts@CNCMachineryLLC.com
