Providing ** PARTS and SERVICE ** for Strippit/LVD turret punch presses. Please call 716-830-4630 for assistance
Cart 0

S machine J Frame

The S Series machines machined in 2 pieces the permanently joined to become one piece J framed machines.  These machine utilized the 33 station turret, and the 2 servo auto index was a superior design. Considered by many as a reliable, we'll designed workhorse.  Parts support is good, and there were a few variations, 40", and 50" throats, and 65", and 80" X travel designs.  The machine utilized 3 different controllers over the years. Fanuc OPB and OPC, and a few PC controlled machines also shipped.  The PC machines are to be avoided because of an obsolete, unsupportable Strippit® controller.

 

Common Part List

*Select link to go to product

Sensors

Shot Pin Sensors   

Strip Sensor

Press Drive Sensors

Work Clamp Scan Sensor

Work Clamp Protect Small and Large Sensor

X,Y Limit Sensors

Turret Slow/Reference Sensor Early Machines

Turret Reference Sensor Later Machines

Reposition Cylinder Sensor

Auto Index Engage/Disengage Sensor

Index Station Recognition Sensor

Work Clamp Closed Sensor

Hood Door Closed Sensors

Toolring Open Sensor

Drop Door Sensor

Press Drive Oil Level Switch

Airline Disengage Sensor

Work Clamp FootSwitch

Multitool Retracted Switch Long Tool

Multitool Retracted Switch Short Tool

Green Cycle Start Button

Yellow Mushroom Side Gauge Button

Servomotors

X Axis Servomotor

Y Axis Servomotor

T Axis Servomotor

C Axis Servomotor

Air Cylinders

Reposition Cylinder

Shot Pin Cylinder

Multitool Cylinder Short Tool

Multitool Cylinder Long Tool

Work Clamp Cylinder

Side Gauge Cylinder

Auto Index Brake Release Cylinder

Auto Index Engage Cylinder

Solenoid Bank Complete

Single Position Solenoid

Double Position Solenoid

Work Clamp Parts

Lower Jaw

Upper Jaw

Gauge Block

Work Clamp Body

Workclamp Height Spring

Linear Bearing

Work Clamp Target

Work Clamp Ratchet Handle Metric

Work Clamp Ratchet Handle Inch

Work Clamp Wedge Plate

Work Clamp Mounting Plate

Work Clamp Link Pin Assembly

Turret Parts

3-1/2" Bushing

1-1/4" Bushing

Auto Index Bushing with gear

 


CNC 1842

Coupler AI Flex

Replaces Strippit® Part Number 107727-100

From $313.00
CNC 1610

Bushing 1-1/4 Turret

(Replaces Strippit® Part Number 100230-000)

$249.00
CNC 2668

Switch Micron Unit - Refurbished

(Replaces Strippit® Part Number 802029-000)

$487.00
CNC 1236

Seal Ram

(Replaces Strippit® Part Number 17534-000)

$140.00
CNC 2712

Accumulator Hyd. C/B

(Replaces Strippit® Part 802504-000)

(replaces Strippit® Part 802494-000)

$1,088.00
CNC 2599

Angled Flat Cage Assy. Auto

(Replaces Strippit® Part Number 800175-400)

$630.00
$848.00
CNC 5500

Clutch Plate Alignment Kit

 

From $696.00
CNC 4196

Pump Group HYD C/B Main 1000PSI

contains both pumps, coupled together

rebuilt must return core

replaces Strippit® 802994-050

$4,032.00
CNC 2896

Sensor Air Pressure

(Replaces Strippit® Part Number 1000078-000)

$195.00
Request quote at Parts@CNCMachineryLLC.com
CNC 2707

Seal Outer Cover Hyd C/B

(Replaces Strippit® Part Number 802499-000)

$433.00
Request quote at Parts@CNCMachineryLLC.com
CNC 1365

Bearing Set X,Y Ballscrew set of 2

(Replaces Strippit® Part Number 18948-000)

$445.00
$473.00
CNC 4009

Shot Pin Bushing 33 station

replaces Strippit® 88350-100

$292.00
Request quote at Parts@CNCMachineryLLC.com
CNC 2635

Sensor Proximity Quick Connect

NPN NO, includes cable

Feed Start, Punch End early S, 1000/3, XT, FANUC

(Replaces Strippit® Part Number 801051-000)

$195.00
$199.00
CNC 1380

Cylinder Reposition 1250/30, S series

(Replaces Strippit® Part Number 19191-000)

$264.00
Request quote at Parts@CNCMachineryLLC.com
CNC 1279

Sensor Magnetic Cylinder Position Bimba

(Replaces Strippit® Part Number 17945-000)

$153.00
CNC 1272

Table Ball

(Replaces Strippit® Part Number 17848-000)

From $14.00
CNC 1168

Hug Nut Ballscrew 33 Station  Sold in Pairs

Replaces Strippit® Part Number 16283-000

$31.00
CNC 1150

Vlier Pin 

Replaces Strippit® Part Number 15838-000

$13.00
CNC 1553

Retainer Pin 1-1/4 die base

Replaces Strippit® Part Number 83639-000

$41.00
CNC 6060

Pinion Assembly Complete Rebuilt

Replaces Strippit® 107637-100

$557.00
Request quote at Parts@CNCMachineryLLC.com