CNC 2711
Brake Disk lined Hyd C/B Good Used Sold individually
Replaces Strippit® Part Number 802503-000
We sell them individually for your convenience. Keep in mind the outer disk in the PAK is normally ground to adjust the thickness of the PAK. Do not replace this without grinding to makeup original thickness. Typically just replace worn disks within the PAK or pads that have been damaged.
Notes
Hydraulic clutch-brake PAD COUNT 30 ton machines
Clutch PAK. 2.42-2.416 new. .020 wear max 7 sprocket 8 disk
Brake PAK 1.708-1.776. New .05 wear max 5 sprockets 6 disks
20 ton machines
6 pads 5 sprockets for both clutch and brake
1.708-1.776
Installation Procedure
Replacing pads is usually unnecessary in my experience. Although outer pad may appear worn it is most likely due to a factory grinding to adjust pack thickness. If you stuff a set in that is too thick for design it will rub or not move at all. You will also need an alignment fixture to put this assembly back together. Check my “tool rental” for this kit.
