American made metal fabrication equipment CALL TODAY 1-888-879-5906
Cart 0

Hydraulic Clutch/Brake

Components used in the Mechanical ram with a hydraulic clutch brake system.  This system was widely used in the late 80s and 90s

CNC 2711

Brake Disc Pack Hyd C/B  Good Used

20 ton and 30 ton Brakes require 6 lined disks for the brake, 8 for the clutch. I sell them individually, to keep the price down.  Most times only 1 or 2 are needed.

Replaces Strippit® Part Number 802503-000

From $ 200.00
CNC 2958

Pressure Guage System Hyd C/B 0-2000PSI Liquid Filled

2 different configurations were used, back fitting, or bottom fitting.  please select the proper one

(Replaces Strippit® Part Number 1000705-400) 

$ 42.00
CNC 2751

Hyd C/B Brake Spring set of 6

(Replaces Strippit® Part Number 802994-270)

$ 33.00
CNC 2712

Accumulator Hyd. C/B

(Replaces Strippit® Part 802504-000)

(replaces Strippit® Part 802494-000)

$ 782.00
CNC 2705

Seal Oil Hyd C/B Internal, set of 2

(Replaces Strippit® Part Number 802497-000)

$ 36.80
CNC 3917

Heat Exchanger complete with fan

This is a replacement for the exchanger on the Hydraulic clutch brake power pack

NON STOCK ITEM LEADTIME A.R.O.   2 weeks......call to expedite

AOC-190-86167

$ 652.00
Request quote at Parts@CNCMachineryLLC.com
CNC 3916

Motor Fan Fasco Hyd C/B Power Unit

Strippit® used 3 different units so make sure you check your motor if it is a Fasco this is the proper part

Replaces Fasco® part A67233

$ 432.00
Request quote at Parts@CNCMachineryLLC.com
CNC 3828

Clutch Disk Pak Used

20 ton and 30 ton Clutches require 6 lined disks.  We sell them individually

20 ton machines require 6 lined disks and 30 ton Brakes require 8 lined disks. 

 We sell them individually for your convenience.  Keep in mind the outer disk in the PAK is normally ground to adjust the thickness of the PAK.  Do not replace this without grinding to makeup original thickness.  Typically just replace worn disks within the PAK or pads that have been damaged.

(replaces Strippit 802502-000)

210406

$ 200.00
CNC 3787

Gage Hydraulic Pressure 0-2000 PSI

(replaces Strippit® Part # 800972-000)

$ 40.00
CNC 3719

Manifold assembly S machine

( replaces Strippit® part number 802332-200)

$ 1,400.00
CNC 2759

Drain Basin Hyd CB

(Replaces Strippit® Part Number 802994-410)

From $ 0.00
CNC 2753

Bolt CB assembly

(Replaces Strippit® Part Number 802994-310)

$ 4.00
CNC 2760

O Ring Hyd C\B

(Replaces Strippit® Part Number 802994-420)

$ 75.00
Request quote at Parts@CNCMachineryLLC.com
CNC 3127

Foil Tape

Precut for S machine Press Drive

(Replaces Strippit® Part Number 8682000-000)

$ 40.00
Request quote at Parts@CNCMachineryLLC.com
CNC 2959

Oil Cooler Fan Assy Hyd. C/B

(Replaces Strippit® Part Number 1000705-500)

From $ 240.00
CNC 2957

Pressure Guage Cooling Hyd c/b

(Replaces Strippit® Part Number 1000705-300)

$ 42.00
CNC 2697

Manifold Assy M

(Replaces Strippit® Part Number 802332-300)

From $ 200.00
CNC 1190

Fitting Elbow 3/8 tube x 3/8 NPT

(Replaces Strippit® Part Number 16750-000)

$ 11.00
CNC 2826

Clutch Plate 20 ton

includes 6-M10 x 25mm SHCS, and Retainer Washer

(Replaces Strippit® Part Number 803414-300)

$ 450.00
CNC 2743

Hyd C/B Actuator Pump

(Replaces Strippit® Part Number 802994050)

$ 2,200.00