S machine J Frame
The S Series machines machined in 2 pieces the permanently joined to become one piece J framed machines. These machine utilized the 33 station turret, and the 2 servo auto index was a superior design. Considered by many as a reliable, we'll designed workhorse. Parts support is good, and there were a few variations, 40", and 50" throats, and 65", and 80" X travel designs. The machine utilized 3 different controllers over the years. Fanuc OPB and OPC, and a few PC controlled machines also shipped. The PC machines are to be avoided because of an obsolete, unsupportable Strippit® controller.
Common Part List
*Select link to go to product
Sensors
Work Clamp Protect Small and Large Sensor
Turret Slow/Reference Sensor Early Machines
Turret Reference Sensor Later Machines
Auto Index Engage/Disengage Sensor
Index Station Recognition Sensor
Multitool Retracted Switch Long Tool
Multitool Retracted Switch Short Tool
Yellow Mushroom Side Gauge Button
Servomotors
Air Cylinders
Auto Index Brake Release Cylinder
Work Clamp Parts
Work Clamp Ratchet Handle Metric
Work Clamp Ratchet Handle Inch
Turret Parts
Washer 17/64 x 3/4
for complete Pin Assembly see CNC 3977
(Replaces Strippit® Part Number 8490110-200)
Bearing Ball Workclamp
for complete pin assembly see CNC 3977
(Replaces Strippit® Part Number 803241-000)
Pulley Drive AI coupler
replaces Strippit ® 118625-000
Request quote at Parts@CNCMachineryLLC.com
Workclamp Link Pin Assembly
Consists of 1-pin CNC 2034, 2-retaining rings CNC 3118, 2-bearings CNC 2778, and 2- washers CNC 3119
replaces Strippit® 119912-999
Sensor 12mm Proximity Quick Connect with cable
replaces Strippit® 800503-000
same as Strippit® 803318-000
Heat Exchanger complete with fan
This is a replacement for the exchanger on the Hydraulic clutch brake power pack
NON STOCK ITEM LEADTIME A.R.O. 2 weeks......call to expedite
AOC-190-86167
Request quote at Parts@CNCMachineryLLC.com
Motor Fan Fasco Hyd C/B Power Unit
Strippit® used 3 different units so make sure you check your motor if it is a Fasco this is the proper part
Replaces Fasco® part A67233
Request quote at Parts@CNCMachineryLLC.com
Fitting Quick 1/8 NPT to 1/4” tube
Sold in Pack of 5 pcs
Replaces Strippit® 18552-000
Request quote at Parts@CNCMachineryLLC.com