Providing ** PARTS and SERVICE ** for Strippit/LVD turret punch presses. Please call 716-830-4630 for assistance
Cart 0

S machine J Frame

The S Series machines machined in 2 pieces the permanently joined to become one piece J framed machines.  These machine utilized the 33 station turret, and the 2 servo auto index was a superior design. Considered by many as a reliable, we'll designed workhorse.  Parts support is good, and there were a few variations, 40", and 50" throats, and 65", and 80" X travel designs.  The machine utilized 3 different controllers over the years. Fanuc OPB and OPC, and a few PC controlled machines also shipped.  The PC machines are to be avoided because of an obsolete, unsupportable Strippit® controller.

 

Common Part List

*Select link to go to product

Sensors

Shot Pin Sensors   

Strip Sensor

Press Drive Sensors

Work Clamp Scan Sensor

Work Clamp Protect Small and Large Sensor

X,Y Limit Sensors

Turret Slow/Reference Sensor Early Machines

Turret Reference Sensor Later Machines

Reposition Cylinder Sensor

Auto Index Engage/Disengage Sensor

Index Station Recognition Sensor

Work Clamp Closed Sensor

Hood Door Closed Sensors

Toolring Open Sensor

Drop Door Sensor

Press Drive Oil Level Switch

Airline Disengage Sensor

Work Clamp FootSwitch

Multitool Retracted Switch Long Tool

Multitool Retracted Switch Short Tool

Green Cycle Start Button

Yellow Mushroom Side Gauge Button

Servomotors

X Axis Servomotor

Y Axis Servomotor

T Axis Servomotor

C Axis Servomotor

Air Cylinders

Reposition Cylinder

Shot Pin Cylinder

Multitool Cylinder Short Tool

Multitool Cylinder Long Tool

Work Clamp Cylinder

Side Gauge Cylinder

Auto Index Brake Release Cylinder

Auto Index Engage Cylinder

Solenoid Bank Complete

Single Position Solenoid

Double Position Solenoid

Work Clamp Parts

Lower Jaw

Upper Jaw

Gauge Block

Work Clamp Body

Workclamp Height Spring

Linear Bearing

Work Clamp Target

Work Clamp Ratchet Handle Metric

Work Clamp Ratchet Handle Inch

Work Clamp Wedge Plate

Work Clamp Mounting Plate

Work Clamp Link Pin Assembly

Turret Parts

3-1/2" Bushing

1-1/4" Bushing

Auto Index Bushing with gear

 


CNC 2895

Grommet Rubber Cover

(Replaces Strippit® Part Number 1000077-000)

$16.00
Request quote at Parts@CNCMachineryLLC.com
CNC 2890

Valve 90 Deg Flow Control 1/4 Tube -1/4 NPT

(Replaces Strippit® Part Number 1000056-000)

$18.00
CNC 2880

Cylinder Bimba Prog WC

used on programmable work clamps

(Replaces Strippit® Part Number 803869-000)

$92.00
CNC 2795

Switch Air Select 30mm

(Replaces Strippit® Part Number 803299-000)

$84.00
CNC 2779

Shoulder Bolt WC ratchet adjuster 2 piece set with springs

(Replaces Strippit® Part Number 803242-000)

$34.00
CNC 2771

Hydraulic Clutch / Brake

(Replaces Strippit® Part Number 803213-000)

$27,764.00
Request quote at Parts@CNCMachineryLLC.com
CNC 2765

Slide Base MotorMount 213T

(Replaces Strippit® Part Number 803165-000)

From $135.00
CNC 2763

Seal Oil Hyd C/B Internal

(Replaces Strippit® Part Number 802994-450)

$50.00
CNC 2762

Brake Drive Ring and Hsg reconditioned

(Replaces Strippit® Part Number 802994-440)

$903.00
CNC 2761

Clutch Drive Ring Hyd C/B Int

(Replaces Strippit® Part Number 802994-430)

From $695.00
CNC 2755

Hub Retainer Hyd C/B Internal

(Replaces Strippit® Part Number 802994-360)

From $105.00
CNC 2754

Splined Hub Hyd C/B Internal

(Replaces Strippit® Part Number 802994-350)

$1,527.00
Request quote at Parts@CNCMachineryLLC.com
CNC 2750

Brake Plate

(Replaces Strippit® Part Number 802994-250)

From $695.00
CNC 2749

Cylinder Brake Hub

(Replaces Strippit® Part Number 802994-240)

From $695.00
CNC 2745

Sensor Float Switch

(Replaces Strippit® Part Number 802994-170)

$195.00
CNC 2743

Hyd C/B Actuator Pump

(Replaces Strippit® Part Number 802994050)

$3,054.00
CNC 2708

Seal Piston Hyd C/B Internal

(Replaces Strippit® Part Number 802500-000)

210416

$986.00
Request quote at Parts@CNCMachineryLLC.com
CNC 2698

Seal Flywheel

(Replaces Strippit® Part Number 802333-000)

$46.00
CNC 2670

Belt Auto Index Micron Switch to Motor S Machine

(Replaces Strippit® Part Number 802038-000)

$49.00
CNC 2639

Bearing Flange lifter stud

(Replaces Strippit® Part Number 801139-000)

$20.00