Providing ** PARTS and SERVICE ** for Strippit/LVD turret punch presses. Please call 716-830-4630 for assistance
Cart 0

S machine J Frame

The S Series machines machined in 2 pieces the permanently joined to become one piece J framed machines.  These machine utilized the 33 station turret, and the 2 servo auto index was a superior design. Considered by many as a reliable, we'll designed workhorse.  Parts support is good, and there were a few variations, 40", and 50" throats, and 65", and 80" X travel designs.  The machine utilized 3 different controllers over the years. Fanuc OPB and OPC, and a few PC controlled machines also shipped.  The PC machines are to be avoided because of an obsolete, unsupportable Strippit® controller.

 

Common Part List

*Select link to go to product

Sensors

Shot Pin Sensors   

Strip Sensor

Press Drive Sensors

Work Clamp Scan Sensor

Work Clamp Protect Small and Large Sensor

X,Y Limit Sensors

Turret Slow/Reference Sensor Early Machines

Turret Reference Sensor Later Machines

Reposition Cylinder Sensor

Auto Index Engage/Disengage Sensor

Index Station Recognition Sensor

Work Clamp Closed Sensor

Hood Door Closed Sensors

Toolring Open Sensor

Drop Door Sensor

Press Drive Oil Level Switch

Airline Disengage Sensor

Work Clamp FootSwitch

Multitool Retracted Switch Long Tool

Multitool Retracted Switch Short Tool

Green Cycle Start Button

Yellow Mushroom Side Gauge Button

Servomotors

X Axis Servomotor

Y Axis Servomotor

T Axis Servomotor

C Axis Servomotor

Air Cylinders

Reposition Cylinder

Shot Pin Cylinder

Multitool Cylinder Short Tool

Multitool Cylinder Long Tool

Work Clamp Cylinder

Side Gauge Cylinder

Auto Index Brake Release Cylinder

Auto Index Engage Cylinder

Solenoid Bank Complete

Single Position Solenoid

Double Position Solenoid

Work Clamp Parts

Lower Jaw

Upper Jaw

Gauge Block

Work Clamp Body

Workclamp Height Spring

Linear Bearing

Work Clamp Target

Work Clamp Ratchet Handle Metric

Work Clamp Ratchet Handle Inch

Work Clamp Wedge Plate

Work Clamp Mounting Plate

Work Clamp Link Pin Assembly

Turret Parts

3-1/2" Bushing

1-1/4" Bushing

Auto Index Bushing with gear

 


CNC 3810

Solenoid Valve Stack S Prog. Clamps

(replaces Strippit® 121407-000)

$696.00
$1,235.00
CNC 2921

Motor 2HP 208-460 Hyd CB Unit

(Replaces Strippit® Part Number 1000280-200)

From $216.00
CNC 2896

Sensor Air Pressure

(Replaces Strippit® Part Number 1000078-000)

$201.00
CNC 2760

O Ring Hyd C\B

(Replaces Strippit® Part Number 802994-420)

$108.00
CNC 2747

Clutch Plate Hyd C/B 30 ton

includes 6-M10 x 25mm SHCS, and Retainer Washer

(Replaces Strippit® Part Number 802994-220)

$1,411.00
CNC 2707

Seal Outer Cover Hyd C/B

(Replaces Strippit® Part Number 802499-000)

$446.00
Request quote at Parts@CNCMachineryLLC.com
CNC 2706

Seal Oil Hyd C/B Internal

(Replaces Strippit® Part Number 802498-000)

$126.00
CNC 2704

Solenoid Hyd. Clutch/ Brake

(Replaces Strippit® Part Number 802495-000)

From $223.00
CNC 2659

Belt Auto Index Drive S

(Replaces Strippit® Part Number 801664-000)

$51.00
CNC 2643

Cylinder Auto Index Motor Up/Down

(Replaces Strippit® Part Number 801175-100)

$488.00
CNC 1935

Gage pin 1000R,H20,H30,S

(Replaces Strippit® Part Number 119534-000)

$398.00
CNC 1870

Punch Driven Gear (Auto Index Station Bushing)

(Replaces Strippit® Part Number 108214-000)

(Replaces Strippit® Part Number 108214-100)

$1,145.00
$1,577.00
CNC 1851

3.5 Lifter GN6 33 station reconditioned

(Replaces Strippit® Part Number 107808-100)

$373.00
Request quote at Parts@CNCMachineryLLC.com
CNC 1843

Die Clamp AI -INCH  USED

used on early 90s Auto Index Stations

includes 5/16 x 1-1/2 SHCS

(Replaces Strippit® Part Number 107743-000)

From $65.00
CNC 1643

Lifter Stud S1000/3  Reconditioned

(Replaces Strippit® Part Number 100726-000)

$8.00
CNC 1365

Bearing Set X,Y Ballscrew set of 2

(Replaces Strippit® Part Number 18948-000)

$459.00
$488.00
CNC 2697

Manifold Assy M,S

(Replaces Strippit® Part Number 802332-300)

From $287.00
CNC 3289

Circuit Board Axes Control

(Replaces Fanuc® Part Number A16B-1211-0331-03A)

$717.00
CNC 3287

PMC Board OPB

(Replaces Fanuc® Part Number A16B-1211-0300)

From $1,076.00
CNC 3763

Servomotor Fanuc Y Axis S machine REBUILT

( replaces Fanuc® A06B-0572-B061)

 

 

From $4,802.00
$11,611.00