American made metal fabrication equipment CALL TODAY 1-888-879-5906
Cart 0


Workclamp's are arguably one of the most critical components of a Strippit® turret punch press.  Not only do they prevent the metal parts from being thrown across the room at high speed. They are the surface that gauges the material in the Y axis ensuring accurate parts.  Damaged, unmaintained workclamps make it impossible to safely produce quality parts.

All clamp gage blocks, and bodies are precision machined to ensure matched clamps when bought in sets.  All assembly work completed on a workclamp should include removable Loctite® to ensure reliable service.  We include replacement hardware, and Loctite® with many of our parts.

Our replacement clamps have been designed and manufactured to exceed the functionality of the original equipment clamps.  Our clamps are produced in a precision machine shop, guaranteeing consistent products.


Strippit Work Clamp Avoidance

All Strippit machines manufactured after 1985 included a decent way to detect a Workclamp and avoid it.  However there are many ways to punch a Workclamp either through lack of maintenance, or operator carelessness.

S style manual clamps.....most common cause of a punched clamp is the operator forgets to tighten the Workclamp after moving it.  As the machine scans the position into memory the clamp will move causing the stored position to be wrong...... Without a rescan the machine will likely punch the clamp.  A second problem involves the scan switch or its vane on the clamp being bent.  A quick visual check each morning, and after a crash should insure these items are undamaged.  The sensor is located in the center of the X AXIS carriage.  If you don't know where that is ask your supervisor!  Machine failure of this system is not the problem!

Global, M machines with MANUAL clamp movement

The only way to punch these clamps is leaving them loose after moving them.  The system is quite robust, and therefore a machine error allowing a clamp to be punched is very unlikely!

Global machines with AUTO CLAMP POSITION

These clamps are completely automatic and should be LEFT ALONE

any manual movement is dangerous, and will allow the machine to lose track of the present position of the clamps.  Any manual movement should be followed buy a RESET command before proceeding.  Damage to these clamps is frequently caused by slamming sheets of steel into them.. When material is loaded from over an operators head onto the bed of the machine, damage to the clamp is likely.  The pins are very expensive.  If you punch a clamp on a Global machine due to carelessness the cost can exceed $4000.00.  If in doubt press the RESET button after all manual clamp movement.  This will force the machine to rescan the clamp prior to movement.

H30 machines.

The H30 with auto clamps is different than other auto clamp arrangements.  The machine doesn't have positive confirmation that the locating pin in the bottom of the clamp that moves the clamp is securely in position.  This can cause the clamp to move to random location without the machine having knowledge of the error.  The ONLY reliable method of insuring you don't punch clamps on this machine is to ALWAYS press RESET after a clamp move.  This will force the machine to verify the clamp position prior to punching.  I highly recommend that a clamp strip is used with this machine at all times due to this design flaw.  A daily check of pin engagement in the work clamp during relocation would reduce the chance of damage.

CNC 7000

Workclamp Z Float Complete S,MXP,H30 universal 

Replaces Strippit® 130012-000, Replaces Strippit® 130012-100

From $ 1,500.00
$ 9,100.00
CNC 2018

Stationary Mounting Plate Work Clamp Universal 

(Replaces Strippit® Part Number 119898-000)

replaces Strippit® 119899-100

$ 1,125.00
$ 2,585.00
CNC 4201

Body Workclamp 2 piece 6mm Includes Hardware,

(to replace bottom section only see CNC 2016)

Replaces Strippit® 119896200

$ 1,005.00
CNC 2015

Body Workclamp Standard 2 piece ( includes metric, and inch hardware)

If you only need the lower body see my part number CNC 2016

(Replaces Strippit® Part Number 119896-200)

$ 700.00
CNC 4161

Pin Programmable Work Clamp S

replaces Strippit® 121298-000

$ 380.00
CNC 7010

Body Lower Integral Zfloat Rev A


$ 325.00
CNC 2016

Body Workclamp 2 pc. Lower

Replaces Strippit® Part Number 119896-666

From $ 325.00
CNC 3942

Pin Assembly Programmable WC

replaces Strippit® 121350-000

From $ 255.00
CNC 2780

Bearing Work Clamp THK

(Replaces Strippit® Part Number 803244-000)

$ 220.00
Sold Out
$ 242.00
CNC 2020

Upper Jaw Workclamp S style

(Replaces Strippit® Part Number 119899-000)

$ 220.00
CNC 3937

Vane Target S Workclamp Prog

replaces Strippit® 119897-100

$ 129.00
CNC 2017

Target Vane Workclamp S

(Replaces Strippit® Part Number 119897-000)

$ 127.00
CNC 2028

Wedge Plate Workclamp Inch S

(Replaces Strippit® Part Number 119905-000)

$ 122.00
CNC 3977

Workclamp Link Pin Assembly

Consists of 1-pin CNC 2034, 2-retaining rings CNC 3118, 2-bearings CNC 2778, and 2- washers CNC 3119

replaces Strippit® 119912-999

$ 90.00
CNC 2024

Lower Jaw Universal S style

(Replaces Strippit® Part Number 119902-300)

(Replaces Strippit® Part Number 119902-000)

$ 70.00
CNC 2025

Work Clamp Gauge Block Modified 

This is a universal replacement for Strippit® PN. 119903-000


$ 65.00
CNC 2029

Plate Wedge Metric S

(Replaces Strippit® Part Number 119905-100)

$ 65.00
Sold Out
CNC 2026

Work Clamp Gauge Block SH

See CNC 2025 for ordering  

(Replaces Strippit® Part Number 119903-000)

$ 44.00
CNC 3152

Workclamp Cylinder Adapter plate

(Replaces Strippit® Part Number 119904-000)

use universal plate 119904-100

$ 40.00
CNC 4116

Cylinder Rod Extension Metric

for standard thread use Strippit® 119907-000

Replaces Strippit® 119907-900

$ 38.00
Sold Out