Providing ** PARTS and SERVICE ** for Strippit/LVD turret punch presses. Please call 716-830-4630 for assistance
Cart 0

Press Drive

Many different versions of the punching system exist.  Hydraulic, hydramechanical, and air driven.  The two mechanical rams use a flywheel driven by an electric motor to develop tonnage.  In a hydramechanical system a small hydraulic pump delivers oil to a solenoid which when activated causes the clutch to engage generating a punch cycle.  

Newer machines primarily use hydraulic cylinders with smart controllers to punch.  

CNC 4196

Pump Group HYD C/B Main 1000PSI

contains both pumps, coupled together

rebuilt must return core

replaces Strippit® 802994-050

$ 2,900.00
CNC 2751

Hyd C/B Brake Spring set of 6.     

(Replaces Strippit® Part Number 802994-270)

(Replaces Strippit® Part Number 207992)

$ 174.00
Request quote at
CNC 2712

Accumulator Hyd. C/B

(Replaces Strippit® Part 802504-000)

(replaces Strippit® Part 802494-000)

$ 782.00
CNC 2705

Seal Oil Hyd C/B Internal, set of 2

(Replaces Strippit® Part Number 802497-000)

$ 36.80
CNC 3162

Retainer Washer Hyd C/B

(Replaces Strippit® Part Number 802994370)


$ 32.00
CNC 2711

Brake Disk lined Hyd C/B  Good Used Sold individually

Replaces Strippit® Part Number 802503-000

 We sell them individually for your convenience.  Keep in mind the outer disk in the PAK is normally ground to adjust the thickness of the PAK.  Do not replace this without grinding to makeup original thickness.  Typically just replace worn disks within the PAK or pads that have been damaged.

From $ 200.00
CNC 5500

Clutch Plate Alignment Kit


From $ 500.00
CNC 2707

Seal Outer Cover Hyd C/B

(Replaces Strippit® Part Number 802499-000)

$ 310.80
Request quote at
CNC 2706

Seal Oil Hyd C/B Internal

(Replaces Strippit® Part Number 802498-000)

$ 87.56
CNC 2704

Solenoid Hyd. Clutch/ Brake

(Replaces Strippit® Part Number 802495-000)

From $ 155.00
CNC 2759

Drain Basin Hyd CB

(Replaces Strippit® Part Number 802994-410)

From $ 0.00
CNC 2697

Manifold Assy M,S

(Replaces Strippit® Part Number 802332-300)

From $ 200.00
CNC 2826

Clutch Plate 20 ton

includes 6-M10 x 25mm SHCS, and Retainer Washer

(Replaces Strippit® Part Number 803414-300)

$ 450.00
CNC 2758

Oring Seal HYD C/B Hub

(Replaces Strippit® Part Number 802994-390)

$ 10.00
CNC 4198

Coupling Assembly Main pump HYD C/B

replaces Strippit® 1000280-300

$ 97.00
CNC 4197

Pump Cooling HYD CB 

rebuilt must return core

replaces Strippit® 1000280-500

$ 610.00
CNC 4200

Gauge 0-1500 PSI Liquid Filled

Replaces Strippit® Part Number 1000705-400

Replaces Strippit ® 123898-120

$ 42.00
CNC 3917

Heat Exchanger complete with fan

This is a replacement for the exchanger on the Hydraulic clutch brake power pack

NON STOCK ITEM LEADTIME A.R.O.   2 to expedite


$ 652.00
Request quote at
CNC 3916

Motor Fan Fasco Hyd C/B Power Unit

Strippit® used 3 different units so make sure you check your motor if it is a Fasco this is the proper part

Replaces Fasco® part A67233

$ 432.00
Request quote at
CNC 2956

Sight Gage Hyd C/B Unit

(Replaces Strippit® Part Number 1000705-200)

$ 36.00