CNC 1380

Clutch Plate Alignment Kit

Includes alignment fixture critical to reassembling the CB unit, seals, o-rings, extra clutch and brake pads, new clutch disk, brake disk, and all necessary parts to reassemble the unit.  Contents are inventoried prior to ship, then rechecked when coming back.  You will be credited the difference in actual used after

We will subtract the $250.00 WEEKLY rental charge for the fixture.  Please keep in mind it is the only fixture I have and others need it as well.  Initial charge of $1000.00 will be credited when undamaged fixture is returned.

1 seal - CNC 2706 / 1 - hub retainer kit / 4 seals - CNC 2705 / 8 springs - CNC 2751 / 2 retainer washers - CNC 3162 / 2 locking bolts - CNC 2757 / 1 seal - CNC 2763 / 1 20 ton clutch plate - CNC 2826 / 1 30 ton clutch plate - CNC 2747 / 6 clutch pads - CNC 3828 / 1 brake plate - CNC 2708 / 4 SHCS - CNC 2753/ Fixture

Bushing 1-1/4 Turret

(Replaces Strippit® Part Number 100230-000)

Accumulator Hyd. C/B

these accumulators are rebuildable

Must be charged to 600 PSI, we do rent a charge kit for $50.00 per week.  you will need a small bottle of Nitrogen.

(Replaces Strippit® Part 802504-000)

(replaces Strippit® Part 802494-000)

Switch Micron Unit - Refurbished 

This is  a rotary sensor The output closes every 30 turns.  Used for C axis reference switch on many machines.

Units include adjustment instructions critical to proper operation.

(Replaces Strippit® Part Number 802029-000)