Collections

20 Ton Hi Lo

Similar to the 20 ton system manufactured by Industrial Clutch for Strippit®  High speed punching however plagued by repeatability issues....

30 Ton Hi Lo

This Hydraulic system was manufactured for Strippit® by Industrial Clutch ( same company that produced the C/B units)  it utilized...

Ballscrews & Bearings

The Ballscrew transfers the motion from the servomotor to the moving components of the system.  The Ballscrew is designed to...

Belts and Pulleys

Cables, Wires

Connection cables, motor cables I am working on feedback, and power cables for most models. i intend to stock as...

Circuit Boards

Unless otherwise noted, all circuit boards are reconditioned, and tested in an actual machine prior to shipment.   If the...

Clearance Strippit® Parts

We need to make some room for new collections.  For a limited time, and limited to stock on hand these...

Controls

CNC controllers are the heart of the machine.  All inputs, and outputs are processed in the controller.  The controller also...

Fanuc

In the late 80's Strippit®  started using the FANUC controllers.  Reliability, and ease of integration makes the control the choice...

Featured Parts

Hard to find replacement parts

Filters

Hydraulic Filtration and Contamination All hydraulic systems have a common need...

Global

This Strippit® machine utilizes a bridge frame design was produced in early 2000.  Available in 2 turret configurations 42 station...

Global Thick

Covers the Thick 42 station turret used on Global Machines also referred to as "AMADA" style

H&L Hydraulics

The current system utilized on all Strippit™ Hydraulic punches manufactured in Germany.  This system has proven reliable, accurate, and very...

H20 Series

20 ton Hydraulic Bridge frame machine from the 90s.  Originally used the Macintosh/ or PC controllers, however some were updated...

H30 Machine

The Strippit® H30 machines are bridge frame hydraulic machines, capable of 30 metric tons.  The turret configuration is either 42...

Hardware

Nuts, Bolts, Dowels

HECC

Components for the Houdaille CNC controller, used on all Strippit® machines prior to the late 80's.  I have limited supplies...

Hydraulic Clutch/Brake

Components used in the Mechanical ram with a hydraulic clutch brake system.  This system was widely used in the late...

Legacy

Older machines manufactured by Strippit are numerous.  I stock parts for machines produced starting in 1990.  I do have various...

M1212,1225,1525

Bridge frame Strippit® machine built after 2010.  This machine is a 30 Ton hydraulic machine.  The turret configuration is 47...

Macintosh Controller

All items listed are for the Strippit® Mac Pac controller used on 1000R, 1000XP, 1250R, 1250XP, 1250H20 machines.  These items...

Magnetic Sensors

Magnetic sensors are very similar to proximity sensor except they must be exposed to a magnet to acuate.  Common uses...

Miscellaneous Switches

Includes Pushbuttons, Foot Switches, Roller Switches

Motors

Servomotors, AC Motors, Fan Motors

MXP

Basically a S series machine, however a larger turret and a more reliable Auto Index design makes this a very...

Parma-P machine

These 20 ton turret punches feature a 21 station turret, including  3- 2” Auto Index stations.   An economical machine...

PC Controls

In the early 90's Strippit produced its own controller based on a desktop computer.  The controllers used aftermarket motion cards...

Pneumatic Cylinders

Pistons, Pneumatic Cylinders, Cylinders convert shop air into movement and are an important part of the turret press.  Air must...

Pneumatic Fittings

quick connect, or standard air fittings

Pneumatic Solenoids

Electrically actuated air valves convert compressed air into mechanical movement.  Most solenoids used on Strippit® machinery utilize a 24 VDC...

Pneumatics

Pneumatic category includes cylinders, solenoids, fittings, And hoses.  It is important to a a good source of clean, dry air for...

Press Drive

Many different version of the punching system exist.  Hydraulic, hydramechanical, and air driven.  The two mechanical rams use a flywheel...

Proximity Sensors

Proximity Sensors on machine tools are typically capacitive, voltages are typically very forgiving 12-35 VDC is the norm. They are...

R Style Workclamp

This clamp was used on R, XP, H20 series machines

R,XP Machines

The low cost C Frame machine was introduced in the early 1990s.  This machine was a 20 ton, 20 station...

Rental tools, and fixtures

Sometimes a job can be made much easier with a proper fixture, puller, or tool.  With 30 years experience I...

S machine J Frame

The S Series machines machined in 2 pieces the permanently joined to become one piece J framed machines.  These machine...

S Style Workclamp (Z float)

Workclamp Complete S Style replaces Strippit® 130012-000

Sensors

All Proximity Sensors, Pushbuttons, and Mechanical Switches

Servo

This collection includes the Servomotors that move the X,Y,T,C AXIS.  Also included are the associated drive amplifiers.  Servo units being closed...

Sienna, St

The Strippit Sienna, St series machines are Bridge frame 20 Ton machine.  The press drive is a "SMART" system consisting...

Super 750

The Strippit® Super 750 is a single station punching machine.  It is controlled by a PC based controller designed by...

Turret

This section shows parts for the turret, including bushings, die holders, Auto Index components.

V Machines

Strippit® Verona, or V machine is a 30 ton heavy duty, bridge frame machine.  It utilizes a FANUC Controller (typically...

Workclamps

Workclamp's are arguably one of the most critical components of a Strippit® turret punch press.  Not only do they prevent...